Parametric Timing Belt Pulley

Customizable Parameters:

• Tooth Profile (GT2, HTD 3M, HTD 5M)
• Tooth Count
• Tooth Width (Belt Width)
• Bore Size
• Snap-Ring Size
• Grub Screw Size

What you need to know:

• Printed in two parts.
• A metric snap ring/retaining ring (DIN 471) is required for assembly.
• The hole for the grub screw is intended to be threaded using a metric thread cutter.

Step-by-Step Instructions:

1. Download Timing-Belt-Pulley.FCStd.
2. Select the TimingGear and in the base section, edit the
   • height (Tooth Width/Belt Width)
   • teeth (Tooth Count)
   • type (Tooth Profile)
3. Select the Parameters spreadsheet and edit the
   • Bore Diameter (don't forget a tolerance addition to make it fit!  0.2 seems to be a good value on my printer)
   • Snapring Size (the nominal size of the snap ring you want to use)
   • Total Height (total height of the pulley)
   • Grub Screw Metric Size (the metric thread of your grub screw)
   • Grub Screw Placement (if necessary, height where the grub screw should be placed)
   • Guard Height & Guard Thickness (if you want to customize the guard on both sides of the teeth)
4. Export Pulley-Part1 and Pulley-Part2 and print!  Don't forget to check the print orientation of Pulley-Part2!