Kitchen Wall Phone Holder

This is my first self-made model uploaded to the site. Please don't hesitate to comment any suggestions either about the model, or the upload format, description, etc. Thanks!

The model is a double-sided tape mountable wall phone holder designed for my kitchen. The main goal was to have a wall mounted phone holder above my kitchen counter for my phone, with which I can read recipes (or watch videos, live streams) while cooking, without risking having the device in direct line of sight of splashing, flying, or otherwise unintentionally escaping cooking materials.

Main features:

• Width: 100mm
• Depth: 42mm
• Height:  80mm
• 20x60mm, 0.5mm deep, embedded tape mount space on the back for easy, seamless mounting
• Compatible with both landscape and portrait orientation (portrait leans on the wall above the mount)
•  
• WARNING: the model was not tested with tablets or heavy phones (above 200g), please check print settings for recommendations if you want to use it with such devices!

Print settings:

• 0.2mm layer height (you could print in 0.15mm or 0.10mm for a cleaner look)
• 2 perimeters (you might want to increase this to 3 if you want to test the model with a tablet)
• 15% infill (should be increased to 20-25% for tablets?)
• no brim or supports needed
• top surface ironing (enabled in the attached .gcode file) for a cleaner top layer (optional)
• print tested with a standing orientation, as seen on the pictures, no visible structural stress with phones below 200g weight, although I recommend printing it with PETG for long term use in the kitchen, given the environmental factors (hot steam, etc.)

Within the downloads you can find:

• .stl file of the model
• .3mf file of the model
• .gcode file ready to print with PLA on the Prusa Mini+ (0.4mm nozzle, 0.2mm layer height)

Thank you for downloading and printing my model, happy to receive feedback! :)