Infill Earrings

Circle earrings for 3D Printer Men's wife or girlfriends.
Hexagonal earrings for true lovers of 3D printing.

It can be easily scaled up to a pendant.

Models are 25mm wide and 1mm thick

Print Settings

• Material: Prusament Ocean Blue Petg
• Nozzle: 0.4
• Layerheight: 0.1

Use the included amf file or.:

1. Add the base model first.
2. Right-click on the base model and add the attached modifier (Add Modifier - Load)
3. In the modifier, set infill and layers and permiters.
4. In the Layers and Permiters setting, set the top and bottom to 0
5. You can vary the infill settings as you like.

Extra Settings

1. To fill the pattern better, change the Length of the infill anchor to 50
2. For a nicer bottom surface, print on a textured plate.
3. For a nicer top surface, change the Lift Z to 0.1

Post-Processing

• In some places there may be small strands, they can be gently removed with a scalpel