The wine barrel flower pot

Become a barrel maker! Print and assemble this cute wine barrel flower pot.

The wine barrel flower pot makes a perfect gift.

The wine barrel flower pot really consists of 19 single planks which give the barrel a realistic look. The barrel is 13.0 cm (5.12 inches) high and 9.7 cm (3.82 inches) wide. The inner pot has an inner diameter of 6.8 cm (2.68 inches) and an inner heigth of 11.5 cm (4.53 inches).

Please do not resize the model in your slicer, as the tolerances are designed for the present size.

The wine barrel flower pot is basically my object "The wine barrel box" plus an inner pot to hold the soil. The inner pot should be printed in PETG to make it resistant against the humid soil.

If you need another wine barrel without the flower pot functionality, you might consider my following Thingiverse objects:

https://www.thingiverse.com/thing:5390822 https://www.thingiverse.com/thing:5396937 https://www.thingiverse.com/thing:5428998

List of items to print:

• Barrel flower pot segment V1.stl

Print this item 19 times.

• Barrel flower pot cover bottom V1.stl

Print this item once.

• Barrel flower pot cover top V1.stl

Print this item once.

• Barrel flower pot ring large V1.stl

Print this item once.

• Barrel flower pot ring small V1.stl

Print this item twice.

• Barrel flower pot inner pot V1.stl

Print this item once.

• Barrel flower pot segment+1mm V1.stl
• Barrel flower pot segment-1mm V1.stl

Use these segments as a substitution for one or more normal segments, if the segments do not form the 360 degrees angle at the end. Example: If there is a 2 mm gap, exchange 2 normal segments against 2 segments which are 1 mm wider each.

You may want to print the following items in a brown color to simulate wood:

Barrel flower pot segment V1.stl, Barrel flower pot cover bottom V1.stl, Barrel flower pot cover top V1.stl.

When the following items are printed in a silver color, they look like metal:

Barrel flower pot ring small V1.stl, Barrel flower pot ring large V1.stl.

Print the following item in PETG so that it can withstand the humidity of the soil:

Barrel flower pot inner pot V1.stl

The assembly is easier than the assembly of my other barrels. You will need a rubber band to avoid frustration. Please look at the assembly instructions further down. No glue is needed, everything comes together nicely.

Enjoy printing this object. So many likes and downloads of this object. Thank you very much.

2022-08-01 New segments

Added STLsBarrel flower pot segment+1mm V1.stl andBarrel flower pot segment-1mm V1.stl. If the segments do not form the 360 degrees, substitute one or more normal sized segments with the 1 mm wider or 1 mm less wide segments.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

No

Supports:

No

Resolution:

0.2 mm initial layer, 0.2 mm layer height, use experimental feature "adaptive layers" in Cura

Infill:

20 %

Filament: GIANTARM, TINMORRY PLA

New Brown, Silk Silver

Notes:

Nozzle not larger than 0.4 mm.

If you use the Cura slicer you can use the experimentatl feature "Use Adaptive Layers" to save some print time for the 19 segments. I got very good results with the adaptive layers.

Do not resize the barrel in your slicer program. Everything is designed for the existing size. If you resize it, I am not sure if the segments will form the required 360 ° angle.

Post-Printing

Wine barrel flower pot assembly part 1

Try to create a structure as shown in the picture. Hold it with your fingers.

Please ensure the correct orientation of the round bottom cover. The outer slope of of the bottom cover follows the outer segment.

Wine barrel flower pot assembly part 2

Add the upper inner ring to the structure. It will give it a bit more stability at this moment.

Wine barrel flower pot assembly part 3

Add a rubber band to hold the structure together. The rubber band should sit in the middle outer inset.

Wine barrel flower pot assembly part 4

Add more segments to the 4 existing segments. Try to hold the existing four segments with your fingers to prevent them from moving. This is the difficult part. The more segments you add the more stable the barrel will get.

Wine barrel flower pot assembly part 5

When you have added all 19 segments, the barrel should look like shown in the picture. The rubber band still holds everything together.

Wine barrel flower pot assembly part 6

Insert the top and bottom rings. Please make sure that the rings are facing in the correct direction. The upper part of the upper ring is a bit less wide than the lower part of the upper ring. With the lower ring it is just opposite. Once you have one ring in place the barrel is stable and cannot fall apart any longer.

Wine barrel flower pot assembly part 7

Add the middle ring.

Wine barrel flower pot assembly part 8

Slide in the inner pot which holds the soil.

The assembly is now complete and you have created a very cute wine barrel flower pot.

How I Designed This

The wine barrel flower pot was designed with Blender.

The wine barrel family

These are the current members of the wine barrel family.

The small sized wine barrel: https://www.thingiverse.com/thing:5396937

The medium sized wine barrel: https://www.thingiverse.com/thing:5390822

The wine barrel savings box: https://www.thingiverse.com/thing:5403217

The wine barrel box: https://www.thingiverse.com/thing:5428998

The wine barrel planter: https://www.thingiverse.com/thing:5892736

The wine barrel flower pot: This object.

Category: Outdoor & Garden