Clef coaster

Coaster with a clef for music lovers. Looks amazing on your table. The coaster is 10 cm (3.9 inches) in diameter. Print the clef and the grid in any contrasting colors you like. Glue is required to put the parts together.

Print Settings

Printer Brand:

Flsun

Printer:

Flsun V400

Rafts:

No

Supports:

No

Resolution:

0.2 mm initial layer, 0.2 mm layer height

Infill:

10 &

Filament: GIANTARM, TINMORRY PLA Red, black, yellow, blue

Notes:

Should be printed in PETG, if you would like to put containers with hot liquids on the coaster. Otherwise PLA can be used without problems.

Print the clef first and then the grid. It is most easy to glue the clef into the grid when the grid is still on the printbed.

Post-Printing

Clef coaster assembly part 1

Print the clef first.

Clef coaster assembly part 2

Then print the grid.

Clef coaster assembly part 3

When the grid is still on the printbed put glue into all the insets and insert the clef. Press the clef firmly down. It should fit well. Let everything dry. Remove the coaster from the printbed.

How I Designed This

The clef coaster was designed with Blender.

Category: Kitchen & Dining