DT 770/880/990 Fiio BTR5 Clip

A simple clip similar to the one that comes with the BTR5 to mount directly to your headphones with no drilling required!! The clip simply wraps around the left cup arm and secures to the case with two screws. For this project, you will need:

A Fiio BTR5

A short 90 Degree TRS Cable

One solderable Headphone Jack*

2x M3x8mm Socket Head Screws

2x M3 Washers

*If you have already converted your headphones to a removable cable mod, you do not need the headphone jack. If you have not done this, I followed Wheezy Tech's Video where they give an in depth guide to removing the original wire and installing this headphone jack.