Thrustmaster T.Flight HOTAS 4/One/X IKEA Chair Holder

Description

This mount can attach a Thrustmaster T.Flight HOTAS 4/One/X to an Ikea Poäng chair.

Materials

• 6x M5 screws 35mm for vertical, three for each holder.
• 4x M5 screws 30mm for hinge, two for each holder.
• 10x M5 hex nuts.
• 4x M6 screws, two for each holder. This attaches the controller to the mount.
• Thrustmaster T.Flight HOTAS 4/One/X (I got it on Amazon).

Do you like my models? Consider buying me a coffee ;)

Print Settings

Printer Brand:

Sovol

Printer:

SV04

Rafts:

Doesn't Matter

Supports:

Yes.

Resolution:

0.24 or 0.28

Infill:

30% or stronger

Filament: 

PLA/PETG/ABS/ASA/Nylon - Any should be good

Notes: 

• You can print this model using a 0.6 line width to save time.
• The Thrustmaster HOTAS cable may be too short for this chair, but you can cut it in two and use an HDMI female adapter and an HDMI cable to join the back together.

This mount works for the Thrustmaster T.Flight HOTAS 4/One/X instead of the Saitek X52 Pro.