Powkiddy V90 Replacement Buttons

The D-PAD has a longer and thicker pivot to allow for better diagonals and the L and R triggers fit into the holes for the L2 and R2 triggers but reach to where the L and R triggers end. The original triggers have little rubber pads where the trigger actually contacts the button and the improved triggers are designed to use this same pad. The rest of the buttons are supposed to be exactly the same. For printing, every button should be printed face up except the power switch, which should go upside down. Add supports on overhangs and where applicable. Try to avoid using a brim for the face, start/select, and function buttons. the flat bottom part is the same height as the brim so you have to do a lot of sanding. All of this barely printed on an FDM printer so I'd imagine that SLA would be a lot easier.