Antahkarana for dual-color

A simple Antahkarana for 3D printing.

Needed to make fews for someone so i put the model online.

Like always, the logo is better on the textured plate. Check the first layer to make sure there aren't any issue with it.

You can scale at 50% if you use a 0.2 hotend…

Slicing parameters :

Check you top/bottom layers if you put it before ligth or you will see the infill with only 2 layers)

Make sure Detect thin wall is checked !

Other parameters are classic 0.12 profile from my BBL X1C

NB : Calibration of your filaments are better before multi-color print.

NB2 : Remember to update the flushing volume if you use darker filament.