Ahsoka HueForge / Filament painting
Filament painting of Ahsoka. I have included 3 sizes.
15
61
1
469
updated September 1, 2023
Description
PDFPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 4.6
PLA+ GST3D BLUE Transmission Distance: 3.5
PLA+ GST3D RED Transmission Distance: 3.5
PLA+ GST3D YELLOW Transmission Distance: 4
PLA+ GST3D WHITE Transmission Distance: 4
Swap Instructions:
Start with BLACK
At layer #6 (0.56mm) swap to BLUE
At layer #9 (0.8mm) swap to RED
At layer #12 (1.04mm) swap to YELLOW
At layer #13 (1.12mm) swap to WHITE for the rest.
Tags
Model origin
The author marked this model as their own original creation.
