hueforge toji jujusu kaisen

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA 123-3d black Transmission Distance: 0.5
PLA 123-3d grey Transmission Distance: 1.7
PLA 123-3d orange Transmission Distance: 6
PLA 123-3d White Transmission Distance: 5

Swap Instructions:
Start with black
At layer #6 (0.56mm) swap to grey
At layer #7 (0.64mm) swap to orange
At layer #11 (0.96mm) swap to White for the rest.