Health Potion Tokens DnD keychains (remix)

Lovely keychains for DnD fans :)

Only STL files are included. No MMU files are included due to simplicity of this model.

The color changes at 2mm so you need to use one color for 0mm - 2mm and another color for 2mm - 3.5mm (to the end).
You might need to use 2.01mm if you are gonna use some height range modifier or so. It will make sure that the layer at 2mm is still painted with the first color.
 

Prusa Slicer: set the layers above 2mm to use different material/color. The layer number will be different for you, it depends on your layer height settings.

Bambu Studio: you can paint it yourself or use Height Range Modifier