{"data":{"model":{"id":"569412","slug":"honeycomb-storage-wall-desk-mounting-system","name":"Honeycomb Storage Wall Desk Mounting System","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0","myRating":null,"ratingCount":0,"description":"

This set of mounting brackets will help you to clamp and mount your honeycomb storage wall to your desk.

Need extra versions?

The Bottom Mounting bracket is designed to fit my desk. Let me know via a message or comment if you want me to create an updated version that fits your desk!

So, how does this work?

Using an aluminium T-beam, you can support your Honeycomb Storage Wall parts. The T-beam slides into a bottom mounting bracket that is connected to your desk. Then a few middle mounting brackets will connect to your storage wall and keep it in place, using the wall connectors that are provided for the Honeycomb Storage Wall.

I recommend using 1 T-beam for each part of honeycomb storage wall, but you can decide for yourself how many you'd like. I connected the wall parts to the beams between each two wall parts, but you can do this whereever you want.

Printing instructions

Parts can almost all be printed without supports. Some notes:

Print \u201cBottom mount - back\u201d standing up (tip: enable brim)
Print \u201cBottom mount - front part 1\u201d on the large flat side
Print \u201cBottom mount - front part 2\u201d with supports to support the screw connector part
Print \u201cTop cap v1\u201d and \u201cMiddle mount\u201d as they are, no support needed (tip: enable brim)

Required materials

Aluminium T-beam (20 x 20 mm, 1 mm thickness) - length of about 55.5 cm for two a storage wall of 2 wall parts high
M3 bolt (12 mm, tapered head) - 1 for each middle mount
M3 nut - 1 for each middle mount
M4 bolt (8-16 mm, tapered head) - 4 for each bottom mount
M4 nut - 4 for each bottom mount

Assembly instructions

A. Attaching bottom mounting brackets:

Screw the M4 bolts in the part Bottom mount - back
Attach \u201cBottom mount - front part 1\u201d to it by using two M4 nuts (use the upper holes)
Screw the lower two bolts through the \u201cBottom mount - front part 1\u201d
Put the two connected parts to the edge of the desk
Attach the part \u201cBottom mount - front part 2\u201d to the desk and attach it to the other parts using the remaining two M4 nuts
Repeat for however many T-beam supports you want to install

B. Cut, place and prepare T-beams

Cut the aluminium T-beams to the right length
Slide the beams in the bottom mounts
Insert an M3 nut in each middle mounting bracket
Slide the middle mounting brackets on the T-beams
Cover the top of each T-beam with a top cap

C. Connect to storage wall parts

Insert the wall connectors in the storage wall
Position the bottom mounting brackets in such a way that their centers align with the centers of the M3 holes in the wall connectors
One by one, insert an M3 screw in the wall connectors and screw the storage wall to the middle mounting brackets

Known issue

At step A2 of the assembly, you will notice the two parts aren't actually screwed together, where the front part is only held in place by the two nuts inside the holes. I will fix this in the model in the future, but feel free to message me if you need it sooner.

Edit

There was a typo in the material requirements. The Aluminium T-beam should not be 85 cm but 55.5 cm.

","category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","description":"Tidy up your tools and small parts and keep track of them. Print plastic storage cases, modular organizers, cable spools, drawer system, racks and more.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-09-02T09:16:03.924285+00:00","firstPublish":"2023-08-31T21:57:05.460428+00:00","datePublished":"2023-09-02T09:16:03.907594+00:00","dateCreatedThingiverse":null,"nsfw":false,"aiGenerated":false,"politicalContent":false,"summary":"Mount your HSW to the edge of your desk with this easy to use mounting system","likesCount":37,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":46,"displayCount":1323,"filesCount":5,"privateCollectionsCount":27,"publicCollectionsCount":27,"pdfFilePath":"media/prints/569412/pdfs/569412-honeycomb-storage-wall-desk-mounting-system-9c751b14-81cb-424e-867c-9685ebbd328f.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"addMakePermission":null,"printer":null,"image":{"id":"2162649","filePath":"media/prints/569412/images/4557810_d2ee5422-bf8e-4a19-9c7f-428600d03a63/top-mount.jpeg","rotation":0,"imageHash":"lBgGFQIddPOcEOtJZIdsqPeren+Y","imageWidth":1536,"imageHeight":2048,"__typename":"PrintImageType"},"images":[{"id":"2162649","filePath":"media/prints/569412/images/4557810_d2ee5422-bf8e-4a19-9c7f-428600d03a63/top-mount.jpeg","rotation":0,"imageHash":"lBgGFQIddPOcEOtJZIdsqPeren+Y","imageWidth":1536,"imageHeight":2048,"__typename":"PrintImageType"},{"id":"2162650","filePath":"media/prints/569412/images/4557813_f6c146fc-d017-48a6-b74b-f7fafa660472/middle-mount.jpeg","rotation":0,"imageHash":"VygKFQSNA8qItol5d5iHlp4w5QUz","imageWidth":1536,"imageHeight":2048,"__typename":"PrintImageType"},{"id":"2162654","filePath":"media/prints/569412/images/4557818_8843e3a7-3daa-4607-92d4-f9fabe7afee9/bottom-mount.jpeg","rotation":0,"imageHash":"VxgKFQSAZYhWN3qFdJp3aJeAjAjo","imageWidth":1536,"imageHeight":2048,"__typename":"PrintImageType"},{"id":"2162766","filePath":"media/prints/569412/images/4558061_afda16dd-7297-47ad-bcac-5a0317e8b83e/overview.jpeg","rotation":0,"imageHash":"kBgGDALwF3XZ6naplrjrRM969A==","imageWidth":1152,"imageHeight":2048,"__typename":"PrintImageType"}],"imagesCount":4,"tags":[{"name":"desk","id":"208","__typename":"TagType"},{"name":"deskorganizer","id":"3538","__typename":"TagType"},{"name":"mountingbracket","id":"7463","__typename":"TagType"},{"name":"honeycombstoragewall","id":"71845","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"2415082","filePreviewPath":"media/prints/569412/stls/4557749_1b91e24c-2249-454b-a1e1-79412d2943c1/bottom-mount-front-part-2-v1_preview.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"easyprintProjects":[],"__typename":"PrintType","eligibleForNomination":false,"publishApprovalRequired":false,"publishRequests":[],"priceBeforeSale":null,"user":{"id":"1092133","handle":"JasperZwart_1092133","verified":false,"dateVerified":null,"publicUsername":"Jasper Zwart","avatarFilePath":"media/auth/3d13c35c-6bac-4312-8487-2392a0c75ae1.jpg","badgesProfileLevel":{"profileLevel":20,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null,"referencingArticles":[]}}}

Honeycomb Storage Wall Desk Mounting System

Makes Add make

Comments

Makes