Slot On Parametric Wyze Cam v3 Mount

Slot can be adjusted for height and thickness using Fusion 360 parameters. You may get weird results if you try to make it larger than the camera base mounting slot.

Provided STL is sized for a 19 mm or ¾" thick piece of wood.

Print standing up. You may want to ensure that the seam isn't inside the camera base slot.

Update 9/2/23: added a “hanging” variant because I couldn't get the angle I needed from the original version. Same parameters, but also allows adjustment of the offset distance from the camera to the beam. You can't have the camera flush to the beam because you won't be able to rotate it. I would have been fine with the original position except you can't rotate the camera output 90 degrees; only 180 degrees.