Darth Maul bust (pre-supported)

General information

The fully assembled print at 100% is 232mm (9.1") tall.

Printing instructions

FDM

Should be fully printable on all printers without any supports on FDM :)

Resin

The resin download comes with pre-supported files for small sized printers (like the Mars 2) and medium sized printers (Saturn, Mono X). It comes in two formats:

1. Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
2. Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.

There’s of course also the regular STL files there if you want to do all the slicing yourself, or print at a much larger size using something like the Phrozen Sonic Mega 8K.