Snapmaker 2.0 Single Extruder Adapter for PTFE Coupler PC4-M6

Why and what for.

If you would like to connect PTFE tubing to single extruder - just print this compression fitting, no additional parts required.

• Offset version - for those who have the filament path slightly offset to the hole in extruder body. Like I had. 
• Straight version - for those who have everything lined up.

It designed

• to be a tight fit
• to have minimal impact on on overall extruder dimensions
• to keep the gap minimum between the adapter and the heat sink body, so the filament is not getting stuck in some rare cases. 

Tapered bottom (inside) to ensure smooth filament slide. 

If you like the idea

• Hit ❤ like, leave a comment, post a pic of the print.
• It motivates me to share more of my projects.

Print settings

• Material - PETG/ASA/ABS.
• The rest is up to you.

Additional parts

Nothing else required.

Additional Information

I also have a full 3d printed version of the compression fitting that accepts PTFE tubing directly - no extra parts to purchase.

Updates

9/3/23 - updated the 3mf file. Removed all STL files as an effort to provide uniform experience for my projects.