Metal-look Carving - Hueforge Print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Black Matte
• PLA+ Brown
• PLA+ Grey
• PLA+ Gold
• PLA White

Swap Instructions:

• Start with Black Matte
• At layer #17 (1.44mm) swap to Brown
• At layer #19 (1.6mm) swap to Grey
• At layer #22 (1.84mm) swap to Gold
• At layer #27 (2.24mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.

Print Settings

Rafts:

No

Supports: 

No

Infill:

100%

Category: Other