Voron 2.4 / Trident Canopy

Canopy for the Voron 2.4.  Will need to be printed with supports, corner for fan will need to be mirrored for one side.  Will work with 250, 300, & 350.  Will use the standard acrylic top panel.  Spots for 60mm fans with spacing for charcoal fume filter doubled up, need m3 heat inserts(same as Voron BOM).  Spots to mount extra hardware in the middle pieces and front corner, for led strips, camera, etc, need m3 heat inserts(same as Voron BOM).  Logo goes all the way through or you can print out and glue in for to block hole or different color for logo.

I have updated the Daylight on a Stick XXL mount, not sure if will work with the regular size, now has spots to zip tie wires. Also included 2 mounts with spots for 3 zip ties, will work on the sides or corners, as they all share a 40mm spacing. There is a mount to add a retractable badge holder in one of the corners, is made to work with one like this - https://www.amazon.com/OFES-Retractable-Holder-Swivel-Alligator/dp/B07WPRJY9K/ref=sr_1_86?crid=2WYQVR3H13KVE&dib=eyJ2IjoiMSJ9.uGD7epHV4qnq12Y0B-4sGISycG1L_5VWnJ4liS75MO3NzPDhSAPYDJ_KS9Es4WqPkUR-vo9qWYnYoMUnTc-Tco447-FMwbxnlrefitehOwNM9e5E-kFJyB0vGVbYK4lazX9NmJTJuRR-WputesNA8ziDTAHXlQ9dmDH39Vbv944C1ECQvE0k3XiWOclbLBa-LYf_J-PucTFixviOyP75wuJKPn6pCx3IDtVenbmjvIyWbWxIpOFxRc_7NCucZ1BU.decGrT1sygKEC372dh-Negc3LzJHLctVJyQiBuWY6m0&dib_tag=se&keywords=Heavy%2BDuty%2BRetractable%2BBadge%2BHolder&qid=1731645071&s=office-products&sprefix=heavy%2Bduty%2Bretractable%2Bbadge%2Bholder%2Coffice-products%2C161&sr=1-86&th=1 Just pop out the pin and put on mount so the badge can swivel still, see photo. The one in photo is slightly different but make sure ‘UP’ is up.

If you want to help me out with buying some more filament to replace all that was used to create this.

Cash.App/$PrintSomething

Venmo.com/PrintSomething

PayPal.Me/ModMechanics

Thanks so much.