Cowboy Sunset - HueForge

This is a filament painting of a cowboy at sunset.  It was made by using Midjourney. Printed at 200x200 @ 3.04mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PrintBed Black

PrintBed Grey

Printbed White

PrintBed Orange

PrintBed Red

ProtoPasta Partly Sunny Yellow

PrintBed Chocolate

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Brown

At layer #11 (0.96mm) swap to Grey

At layer #12 (1.04mm) swap to Orange

At layer #16 (1.36mm) swap to Red

At layer #20 (1.68mm) swap to Yellow

At layer #32 (2.64mm) swap to White for the rest.