Biqu H2 V2 Cable Holder Support Guide

Description:

This is used to route your wire loom from the Biqu H2 V2 extruder back to your electronics. It mounts directly to the top of the H2 V2 and is low profile to clear many types of mounts and fan shrouds. The hole can be used to insert filament to help support the loom.

Printing:

• 0.4mm Nozzle, 0.2mm height, brim, ASA
• FlashForge ASA: amzn.to/3szLrtP
• PETG or PC are acceptable alternates, PLA is not recommended

Parts:

• PTFE Tubing 2mm ID x 4mm OD: amzn.to/3KTDAhm
• Braided Wrap Sleeving Wire Loom: amzn.to/3sACYXA
• Cable Ties: amzn.to/3EiuAi7
• (2) of M3x8mm Socket Head Cap Screw: amzn.to/3EdhXof

Related Models:

• Ender 5 Plus Rear Frame Cable and PTFE Tube Holder Guide
• Taeky Biqu H2 V2 5015 Fan Duct V2
• JLCURTIS Biqu H2 V2 Ender 5 Plus Mount

Note: Amazon links are affiliates.