Things Orginizer

This is a simple box that I'm using for different stuff. Mostly for screws and bolts but other stuff like ptfe tubes or small parts fit also perfectly. 

It's quite rigid (if you slice it so) as I used for as a base for my SV06+ for some time. 

The square design let's it fit nicely almost everywhere. If you fit magnets: 8 rectangular [8mm*4mm*1,75mm] and 2 round [10mm*1,8mm] than holds light content firmly.

The iner dimensions fit perfectly two (top and bottom) shelfs. If you use two tops than it won't close if two bottoms than those will be loose inside.

There is a top cover version with a Knitting Things Organizer text and one empty. The pictures present the KTO version because the ones that have defects are used mostly for organizing my stuf. 

The “Over the top shelf” won't fit inside and I gued it on top of the box to hold some things there. It's as big as the box it self and around 13 mm deep. 

As for slicing and printing, if you place it on the flat side it will print perfectly without supports. I mostly use 4 outlines everywhere.