Jewelry hanger (wall mount)

Practical organizer for earrings and jewelry. The hanger is very universal:

• the holes can hold hanging as well as stud earrings;
• the pegs can be used for necklaces, bracelets, rings, elastic bands and more.
• special part is designed for hair clips. This part is optional and can be easily attached to the main hanger.

The hanger is meant to be mounted on the wall. You have several options to do so:

• back side is prepared for a double sided tape (recommended option)
• holes at the top can be used for hanging on the nail or hook
• you can also use the holes to thread the rope.

The dimensions are 200 mm (width) x 110 mm (height) + 100 mm for the hair clip part. (The model can be printed on Prusa Mini.) If you would like to adjust any of the dimensions, just let me know.

Print instructions

Everything can be printed without any supports!

Recommended settings:

Main part
Use brim, layer height 0.15 mm, 4 - 5 perimeters and no infill, tick “Detect bridging perimeters“ option in Prusa slicer.

Hair clips hanger
Print with exposed infill (set top and bottom solid layers to zero). I have used Triangles infill pattern with 60% density. Increase the number of perimeters 5.