Tesla model 3 - Aero Wheel Remix - Center Cover and Lug Nut Covers - Spiral and Plain

This is a remix of a model that had the Tesla logo on the center cap.  Here I am providing two alternative versions: one set with a spiral design on the cap and lug nuts;  another set plain flat.

You might want to take the plain flat set and remix with your own design, or monogram!

I printed these on a smoot glass surface using black PETG which came out having a nice shine on the surface.

In my situation I used the following settings:

• Standard quality (0.2 mm layer height)
• First layer
  • Build plate 90 degrees
  • Extruder 250 degrees
  • 200% Flow (this helped close any gaps on the first layer)
• Second layer
  • Build plate 90 degrees
  • Extruder 230 degrees
• Retraction 
  • Distance 1 mm
  • Speed 25 mm/s
• Top/bottom line - width 1mm
• Wall order - outside first
• Top/Bottom pattern - concentric
• Infill 100%
• Coast enabled
• Comb - All
• Z-Seam - sharpest corner