I needed to hang my Joule sousvide circulator on a larger container, a cooler. I didn't have the factory option to facilitate this, the Joule Big Clamp. So I modeled this part that the regular wire hook attaches too. I printed it in PETG, and then attached to a plastic spring clamp that I already had in the workshop with a M3 stainless socket head screw and nut.
Needed:
I printed with 4 perimeters and 20% cubic infill in PETG with .4mm nozzle and 0.28 layer height. Can be printed without support cleanly as there is a 1 layer bridge built in that the screw can push through for the countersink.
Make and use this at your on risk.
The author marked this model as their own original creation.