Two Face Hueforge
Turned out pretty neat so decided to share, printed this one with a .2mm nozzle
17
32
0
228
updated
August 29, 2023
Description
PDFUsing image from https://images.app.goo.gl/gXSqpi4FGCYB33ie7
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA Bambu Silk Blue Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Charcoal Black
At layer #6 (0.46mm) swap to Red
At layer #9 (0.64mm) swap to Blue
At layer #12 (0.82mm) swap to White for the rest.
Model origin
The author marked this model as their own original creation.