Wago 221 Power Distribution Block (Embedded magnets)

Hello,

Here's a quick remix of @6d6178 work, allowing to embed 4 magnets into the print. The magnets used are 10x2mm round neodynium magnets. Let me know if you want me to add models for the 221-413 and 221-415 wago. 

Print at 0.15mm layer height to get best results! Use the “Pause Print” feature of PrusaSlicer to stop the print at 2.3mm layer height and to add the magnets.

The magnets are now embedded into the print.