Yellow DC motor module mounts

Various "modules" made to slide onto the yellow dc gearbox motors.

This allows them to swivel in place.

Average print time is 1 hour

LCD: made to fit the 16x2 lcd, works with i2c module, lcd can snap fit in without screws or glue

UltraSonic: made to fit the HC-SR04, needs to be glued or screwed in to help hold it in place

Print Settings

Supports:

Yes

Resolution:

0.2

Infill:

10%

Notes:

only a tiny-bit of support in the holes which you will need to clear out using clippers