Align M690L Multicopter Landing Gear Offset

This was made to change the position of the landing gear of Align M690L Multocopter, so you can use larger batteries.

Ive printed ABS, 0.3mm, 50% infill with support. Its very strong in this configuration. The outer 2 holes are thinner, so you can attach the bolts without the need to drill the carbon fiber chassis plate.

Added a small space under the part to route the camera wire.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

0.3mm

Infill:

Notes:

Ive printed ABS. It didnt get pretty, but will do the job. Maybe PLA is strong enough.