Qidi X-Max 3 Camera Mount

25 minutes. Now screws, no drilling. There is a good spot for the camera in the back of the printer. The mount is matches a cheap camera model from Aliexpress (Item 1005005607271308). USB Cable needs to go to free port on the mainboard. For that you need to route the cable through one of the holes in the housing.

Image Quality is not that good. My printer can do 5-8 fps. Still, its ok to see if something goes wrong. Cam view is shown in pictures.

Regarding the camera you need to unscrew the bottom mount and klick the camera into the printed mount. It should sit tight.