4in Plastic Nose Cone E-Bay for Rockets - Inverted Pursuits Lab

4in Plastic Nose Cone Electronics Bay build

This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false

Designed to be glues in or screwed in.

In order to screw it in you will need to source 2-56 screws and drill the required holes (typ 1/16in)

Glueing in is as simple as it sounds, add a little epoxy to the nose cone and slide it in. Be sure not to get epoxy on the threads.

Includes:

1 - Threaded Sleeve (Note this does have a top and a bottom)

1 - Threaded Electronics Carrier/Bulkhead

Still needed:

Uses ¼-20 Eye bolt and nut to attach to rocket

If you're interested in helping support us please check out our webstore: https://inverted-pursuits-lab.square.site/