Dragon Hotend mount for mk3s/mk3s+

This mod allows you to rigidify the installation of a Trianglelab Dragon hotend on mk3s/mk3s+ printers and make the change of nozzle a now 1 hand task without having to hold the heater block and the risk of damaging the thermistor or heater cartridge cables.

The extruder motor plate used has a base is the R6 revision:

https://github.com/prusa3d/Original-Prusa-i3/blob/d7f81f2ef2f313728b81def8b9385fcf47e366fe/Printed-Parts/STL/extruder-motor-plate.stl

I recommend using m2x6 or m2x8 to attach the adaptor to the heatsink.

You need to print both parts.

Print instructions

PETG
infill 20% grid
0.2 mm