Rick and Morty plates and logo for Shadow Box

Recently became a subscriber of https://www.printables.com/@TheCraftyMaker because we love his Shadow Boxes.

These Rick and Morty plates are our personal contribution to increase the number of plate models available to make shadow boxes.

You can download the box without lights here:

https://www.printables.com/model/479648-shadow-box

And for the light box, click here:

https://www.printables.com/model/619326-light-and-shadow-box-simplified-version 

The set consists of the following plates, all with a minimum thickness of 1mm:
1. Black
2. Purple + pastel yellow (1.2mm)
3. Fuchsia + Yellow (1.2mm)
4. Light blue + white (1.2mm) + black (1.6mm)
5. Dark blue

We also include two pieces to create the logo:

• Hook
• RM_logo: it is printed in three colors:
  • Black glitter (or the one you haver used for the box)
  • Green glow (changed at 2.60 mm)
  • White (changed at 3.20 mm)

To join these two parts, a drop of glue is sufficient.

Printing settings:

• Nozzle diameter: 0.4 mm
• Layer height: 0.20 mm
• Prints with no supports

Hope you enjoy this model!

*****************************************************************************************

All Quimicafeina designs are protected by Copyright Law. By downloading, you have no right to sell any digital files or reproductions from those files. 

To get access to all of our designs or for a commercial license to sell the physical prints of the files, you can support us on patreon.