Sortimo 1x1 Bin Dividers and Label

I need a divider for the Sortimo 1x1 bins as I had a lot of small items that needed less space then the orginal bins provided. Turns out that a vertical divider wouldn't work due to the design of the lid so I came up with these removable trays that fit inside of the 1x1 bins. Due to the tapered design of the Sortimo bins, the trays nestle inside but can't slide all the way down. The inserts have a lip to easily remove them and that doubles as a spot for a label. Sized for 12mm label maker.

If you need more 1x1 bins, check out my 1x1 3d printed bins that are as close to the originals as I could get. These inserts work with them perfectly.

1x1 Label Collar
https://www.prusaprinters.org/prints/56333-sortimo-1x1-bin-label-collar

1x2 Label Collar
https://www.prusaprinters.org/prints/58085-sortimo-1x2-label-collar

2x2 Label Collar
https://www.prusaprinters.org/prints/58086-sortimo-2x2-label-collar

2x3 Label Collar
https://www.prusaprinters.org/prints/58087-sortimo-2x3-label-collar

1x1 Insert Divider
https://www.prusaprinters.org/prints/56332-sortimo-1x1-bin-dividers-and-label

1x1 3D Printed Bins
https://www.prusaprinters.org/prints/56331-sortimo-1x1-bins-accurate-to-original

1x2 Cap and Label
https://www.prusaprinters.org/prints/58084-sortimo-1x2-bin-cap-and-label

Enjoy!