Sortimo 1x1 bins - Accurate to original

Need some extra 1x1 bins for the Sortimo system but the models I found online were not exactly the same as the originals and most importantly did not have the registration "feet" that keep the bins from moving on the box's internal grid. Modeled the original as best as I could. Works perfectly with my insert boxes that split the volume of the 1x1's in half for smaller parts.

These were designed to be printed UPSIDE DOWN. Bridging is not extreme but it is recommended that print setting are dialed in to handle the bridging required for this print. Printed mine in PETG for longevity and temperature resistance.

1x1 Label Collar
https://www.prusaprinters.org/prints/56333-sortimo-1x1-bin-label-collar

1x2 Label Collar
https://www.prusaprinters.org/prints/58085-sortimo-1x2-label-collar

2x2 Label Collar
https://www.prusaprinters.org/prints/58086-sortimo-2x2-label-collar

2x3 Label Collar
https://www.prusaprinters.org/prints/58087-sortimo-2x3-label-collar

1x1 Insert Divider
https://www.prusaprinters.org/prints/56332-sortimo-1x1-bin-dividers-and-label

1x1 3D Printed Bins
https://www.prusaprinters.org/prints/56331-sortimo-1x1-bins-accurate-to-original

1x2 Cap and Label
https://www.prusaprinters.org/prints/58084-sortimo-1x2-bin-cap-and-label

Enjoy!