Voron 2.4 Top Hat mod

Voron 2.4 print volume height comes up short of the advertised 350/300.250mm, quite a bit. Here is a "top hat" volume height extension that you can 3D-print and mount on top of your Voron 2.4.

This mod sits between your Voron 2 frame and its top see-through plastic sheet. Specifically, this top hat fits into the existing 2020 aluminum extrusion slots on top of your Voron2 - and reproduces 2020 extrusion slots (in plastic) on its own top, so you can re-affix the see-through plastic sheet.

The top hat's exhaust opening has the same size and position as the one on the "standard" Voron 2. You can try mounting a Voron 2 exhaust filter proper or affix one of the many available exhaust cover plates.

Word of caution - when printing at Z height above ~310mm, keep your minimum Y at 20mm. Otherwise Stealthburner can collide with your Voron 2.4 frame.

Installation instructions

• Instructions and up-to-date files are available here https://makerspet.com/blog/voron-2-top-hat-mod/

If you are reasonably pleased with this mod, please leave a like to help others discover this contribution!

Happy 3D printing!