AMS drawer

Pair of drawers that fit under the AMS system.  Can fit on the X1 print bed. Some of the parts are diagonal to fit.

Minimal support needed.

Most of the parts need to be glued together.  The drawer faces can be slid on .  I plan on using a off the shelf  handle from the hardware store.

The styling is lacking. But a good framework. 

It is intended for stick on rubber feet.  Many sizes and shapes work. You might choose to sand the print a little, to give it a good attachment.

There is a feature to prevent the drawer from coming out too easy. Just lift up on the front to remove.

The build direction is shown in one of the images.