3d printable linear rails/v-slot rails

This is a modular 3d printable linear rail for someone with a tight budget.
477
501
2
5599
updated September 17, 2023

Description

PDF

To assemble it you will need a m5 threaded rod(any length you want) , two m5 nuts, 4 standard skateboard bearings, 4 m3x25mm screws with nuts.

Just put the rails on the m5 threaded rod(there are nobs and holes you need to look out for), then put one m5 nut on either side of the rails and tension them down.

To assemble the guide, put 4 bearings on it, then put the other half on it and screw them together using the m3 nuts and bolts.

Model origin

The author marked this model as their own original creation.

License