Parametric Ball Joint to GoPro Adapter

An adapter that allows you to mount your GoPro style mount compatible action camera to a ball joint.

This adapter was original designed for DJI Osmo Action ball joint mounting accessories using 14mm ball joints. As these mounts use magnetic quick connect mechanism, they are not compatible with GoPro style mounting camera cases - such as the diving case.

Ball Joint:

• Osmo Action (14 mm)
• 1" (25 mm)

Style:

• Curved - more clearance for the case
• Strait

Width:

• Wide - 24 mm
• Narrow - 16 mm

Printing:

Supports: Required
Adhesion: Raft recommended
Infill: 100%
Layer height: ≤ 0.15 mm
Print orientation: Ball up
 

Good layer adhesion is required. Therefor it's recommended to use materials like Nylon or PC. PETG might work in a pinch.

Additional hardware:

To complete the part, you need single M8 hex nut, and a little bit of superglue to secure it in the part.

OnShape document:

https://cad.onshape.com/documents/f0c614b0ffffd03da6f1d045/w/efcd50c085bc8a5db62f2bb8/e/1c6d3c50d75e64952cea3040

All dimensions meant to be changed are defined in configuration studio.