IKEA Vindstyrka PM 2.5 and VOC Meter Housing Case

The model is a case/housing for the IKEA Vindstyrka PM 2.5 and VOC Meter. 

Use Case: Used in Prusa enclosure to monitor and trigger ventilation and Carbon/HEPA filtration system in the enclosure. Integrated into HomeAssistant to monitor and trigger ventilation and Filter system based upon PM2.5 and Temperature. I have a Nevermore Filter for the internal filtration and a ventilation Fan to control the temperature within the enclosure.

The housing supports the use of two 10x3mm magnets for mounting in an enclosure or on a wall. The case/housing and mounting solution is designed to ensure no interference to the internal fan and sensors.

Version (v3) adds two more magnets to strengthen the holding power of the Vindstyrka case within the enclosure or wall.

Please Like and Post your Makes. Much Appreciated!!

Filament: PETG, ASA, ABS

Supports: None

Infill: 25%

BOM: 10x3mm Magnets Qty: 4 (v3) Qty: 2 (v2)