NCC-74959 Voyager - No Support Cut

The model has been cut into several section to be able to print it without support.
It has been increased in size to a length of 250mm.

To make the lineup for the gluing easier FilaPins are added to each cut.
For that you will need 6 peaces of 1.75mm filament which are 9mm long.
Therefore I do not suggest to scale the model.

Also a 3mm hole as been added to part 5 to present the ship on the base.
As a support an peace of 3mm clear filament can be used.

Star Trek Ship Base design:
https://www.prusaprinters.org/prints/56216-star-trek-ship-base

If you don't want the hole for the stand you can use the part 5 without hole.

Credits go to Nerys for the grate model of the Voyager:
https://www.thingiverse.com/thing:2499656/files

I have also created a remix of part 3 and 4 to display the ship in warp flight:
https://www.prusaprinters.org/prints/56223-ncc-74959-voyager-alternative-warp-version-no-supp