Slim CD Drive Stacker

This is a way to house and stack multiple slim CD/DVD drives. This is for drives  (WXDXH) 5 in X 5.1 in X 0.5 in

This design consists of 3 parts 

• CD Bottom With Pegs - This is the foundation piece that will be both bottom of the stack and center stacking pieces.

• CD Top No Pegs - this piece is the top of the stack of X many or for a individual enclosure this also has Shallow chamford holes for screws for the top plate.

• CD Top Plate with screw holes - This is the top of the stack the screws can be secured to the “Top no pegs” piece. There is a lip on the back to capture the top plate 

The disk drive is secured with M2x4mm screws, the holes may not line up well I encourage you to measure and adjust. I was able to get at least 2 screws in each drive. 

The top plate is screwed on with 6#-32 Flat Head screws

Squeezing the pieces together to stack is pretty much a one time connection, they are extremely hard to separate the pieces without breaking them.

Printed on Bambu X1 Carbon Generic PETG 0.16mm - Optimal with default settings