VESA Adapter for Samsung C24F396 Curved Monitor

I was dissatisfied with the commercially available choices, and the 3D-printed solutions I came across online were unreliable. As a result, I took it upon myself to create this unique design! The purpose of this model is to be firmly held in place using either 4 or 8 M5 heatset inserts. Bolts that are 12mm in length should align seamlessly with the rear part of the design. It's possible to use longer bolts, provided there's ample space behind the mounting plate.

This component is specifically compatible with the Samsung C24F396 model, a curved monitor, or any other monitor utilizing a similar unfamiliar mounting hook that I'm not yet aware of.

I strongly suggest utilizing a material known for its exceptional layer adhesion when printing. In my case, I've opted for PETG due to its suitability for this purpose, although high-quality PLA might also suffice.

Should there be an interest in this piece, I am more than willing to create additional variations based on specific requirements, such as incorporating hex nuts as an alternative to the heatset inserts!