Anycubic i3 Mega housing for 12864 LCD Graphic Smart Display Controller Board

This is a housing which can be used to mount a "12864 LCD Graphic Smart Display Controller Board" to an Anycubic i3…
10
97
0
885
updated January 1, 2023

Description

PDF

This is a housing which can be used to mount a "12864 LCD Graphic Smart Display Controller Board" to an Anycubic i3 Mega.

BOM:

  • 4x M3 5mm screw, 4x M3 washer (to mount the holders)
  • 4x M3 10mm screw (to mount the screen)
  • 2x M4 12mm screw, 2x M4 washer, 2x M4 nut (to mount the housing to the holders)

I won't provide an adjusted firmware to make this display operational with an Anycubic i3 Mega/S!

 

Print instructions

Print Settings

  • Infill: 20%
  • Support: no
  • Perimeters: 6
  • Extrusion width: 0.45
  • Layer height: 0.2, 1mm top/bottom thickness
  • Filament: PETG, ASA, ABS

Post-Printing

Rework the 4mm holes of the holders
To make the holes printable without using any supports, I closed them with a 0.2mm thin layer. Just use a screwdriver/knife or a 4mm drill to open them entirely again.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License