Stoned Mushroom Ape - HueForge

• Print at 100% infill 
• Layer height of 0.08mm with a base layer of 0.16mm
• Total of 6 Colors but you can also use less

Filament swap instructions:

• Start with Black
• At layer #10 (0.88mm) swap to Purple
• At layer #13 (1.12mm) swap to Red
• At layer #16 (1.36mm) swap to Orange
• At layer #19 (1.6mm) swap to Yellow
• At layer #28 (2.32mm) swap to White for the rest.