Eflite Viper 90mm Nose

A printable 3d model designed as a spare part for the original nose cone of the Eflite Viper 90mm. The model consists of two parts:

1. The nose cone with sockets for magnets
2. The base plate to be glued onto the fuselage

The nose cone can be assembled and disassembled like the original nose cone for easy transportation. Both parts are held together by two strong magnets per part. 
 

In order to use the base plate, the original foam protrusion on the fuselage front must be cut off.

Caution: The original nose cone acts as an airbag in the event of a hard landing, such as when the jet starts to bounce. This spare part nose cone will not cushion a hard landing. It comes off as intended, but exposes the blunt fuselage front, which can then take damage. The solution: Better landings ;-)