Surface Chromebook Combo Shelf Stand with Magnets

Uses 8x3mm magnets on the bottom

I put a picture of the print orientation I used on my MK3s+.  If you choose not to print the nubs on the bottom you could print it in a more conventional/convenient orientation. The magnet holes might sag a bit and need to be reamed a bit but they will snugly fit the 8x3mm magnets from amazon. 

I printed mine in the orientation pictured, I did use supports in magnet holes in one print and it worked pretty well.  I printed 0.2mm w/ 50% gyroid infill in PETG and it's still going strong as a daily holder for our surface pro and my child school Chromebook. 

If you want an easy way to print without the stubs on the bottom - orient the part and sink it into the build plate, prusa slicer will do the rest and only print what's on the build plate (you may want to add supports for the magnet holes if you orient the part that way). 

If you print this, please post the make so I can see how they look, thanks!