These two birder feeder cups were designed to be attached to a dual shepherd's hook that you might have in your yard or garden. Adding the camera or bird feeder does not affect the two hooks which are typicaly used to hang flower planters or other items. I originally designed the mounting bracket to hold a single Ring security camera, but it was easy enough to add a second slot and a bird feeder to fit the slot.
One of these is a simple cup that will not be protected from the rain, the second includes a cover that will block most precipitation.
I printed these using PETG on a Prusa MK3S and a BambuLab X1C. The version with a rain cover has a 45 degree overhang which printed fine on my Prusa using generic PETG settings.
I had to lower the nozzle temp to 240 from the default generic PETG setting on the Bambu Lab X1C, to match the quality of the Prusa print. The print was functional at the higher temperature, but there were some defects near the end of the overhanging cover. Use your best overhang settings (lower temps, slower speeds) if you choose to print the version with the rain cover.
The author marked this model as their own original creation.