This model is a Hueforge 3D Printing Painting. You need a 3d printer that supports multi-color to 3d print it.
The 3D printer filament of our recommendation is PLA.
3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu PLA Black Transmission Distance: 0.6
PLA Sunlu PLA Grass Green Transmission Distance: 2.5
PLA Sunlu PLA Meta Green Transmission Distance: 10
PLA Sunlu PLA White Transmission Distance: 6
Swap Instructions:
Black until layer #8 at 0.72mm
Grass Green until layer #9 at 0.8mm
Green until layer #12 at 1.04mm
White for the rest.
The author marked this model as their own original creation.