This is a quick to print desk basket using infill as part of the design!
It consists of a top and bottom and a wall part that use infill and no top and bottom layers to create the design.
Set the Perimeters to 2 or 3, and your Top and Bottom Solid layers to 0:
Then set your infill to the pattern you wish to use! I used 40% triangle.
I recommend using 0.2 layer height.
The top and bottom has a slot that the side goes into. I recommend starting with the top. Take is slow, it can be easy to damage the infill!
The author marked this model as their own original creation.