8020 Series 10 Mount for Adafruits Matrix Portal

Do you know when you want to mount your Adafruit Matrix Portal on the aluminum extrusion directly so it does not get in the way of your LED panel mounting solution?

You will need a 16 pin ribbon cable and two M3 Countersunk Flat Head Machine Screws. 14mm or 16mm long. Be sure the cable positions are correct.

The holes on the side of the mount are for zip ties to use as strain relief using zip ties, If you think that it is necessary.

Print instructions

Unassociated tags: Matrix Portol

Category: Electronics Summary

Do you know when you want to mount your Adafruit Matrix Portal on the aluminum extrusion directly so it does not get in the way of your LED panel mounting solution?

You will need a 16 pin ribbon cable and two M3 Countersunk Flat Head Machine Screws. 14mm or 16mm long. Be sure the cable positions are correct.

The holes on the side of the mount are for zip ties to use as strain relief using zip ties, If you think that it is necessary.